Off Center Fed Dipole Antenna

Off Center Fed Dipole Antenna

56.95
Quantity:
Add To Cart
                                Datasheet

                               Datasheet

 

No Trimming Needed Covers 40 Meters, 20 Meters, 10 Meters*, and 6 Meters*

*Covers the bottom 1.5 MHz of the 10 Meter band and the bottom 1 MHz of the 6 Meter Band

SWR Less Than 3 to 1 across the Covered Bands

Rated to handle 300 Watts PEP

The Antenna is 68 and one-half foot long (one side is 23 feet long and the other is 45.5 feet long) with high quality components used throughout. We use #14 7/20 stranded hard drawn copper wire to meet the National electrical Code for antennas. All hardware is 18-8 stainless steel and all internal nuts are self-locking. We build the 4:1 Balun in house following the designs of Jerry Sevick, W2FMI. All of the components (except the UHF connector) are American made.

Just take the antenna out of the box and hang it up and you are ready to go on four Ham bands. Can be used as an inverted V or hung straight.